|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MBRM360 3A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER POWERMITEa3 Features * * * * Guard Ring Die Construction for Transient Protection Low Power Loss, High Efficiency Low Reverse Current For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Polarity Protection Applications NEW PRODUCT A P 3 E G POWERMITEa3 Dim A B C Min 4.03 6.40 Max 4.09 6.61 Mechanical Data * * * * * * * * Case: POWERMITEa3, Molded Plastic Plastic Material: UL Flammability Classification Rating 94V-0 Moisture sensitivity: Level 1 per J-STD-020A Terminals: Solderable per MIL-STD-202, Method 208 Polarity: See Diagram Marking: See Page 3 Weight: 0.072 grams (approx.) Ordering Information: See Page 3 B 1 2 .889 NOM 1.83 NOM 1.10 5.01 4.37 .71 .36 1.73 1.14 5.17 4.43 .77 .46 1.83 .178 NOM J H D E G H M D C PIN 1 PIN 2 K C L PIN 3, BOTTOMSIDE HEAT SINK J K L M P .178 NOM Note: Pins 1 & 2 must be electrically connected at the printed circuit board. All Dimensions in mm Maximum Ratings @ TA = 25C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (See also Figure 5) @ TC = 25C @ TC = 100C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) Typical Thermal Resistance Junction to Soldering Point Operating Temperature Range Storage Temperature Range Symbol VRRM VRWM VR VR(RMS) IO IFSM RqJS Tj TSTG Value 60 42 3 100 50 3.2 -55 to +125 -55 to +150 Unit V V A A C/W C C Electrical Characteristics Characteristic Reverse Breakdown Voltage (Note 1) Forward Voltage (Note 1) @ TA = 25C unless otherwise specified Symbol V(BR)R VFM Min 60 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 Typ 3/4 0.59 0.53 0.72 0.63 2.0 0.6 2.5 130 Max 3/4 0.63 0.57 0.76 0.67 200 20 150 3/4 Unit V V mA mA mA pF Test Condition IR = 0.2mA IF = 3A, Tj = 25C IF = 3A, Tj = 125C IF = 6A, Tj = 25C IF = 6A, Tj = 125C Tj = 25C, VR = 60V Tj = 100C, VR = 60V Tj = 125C, VR = 60V f = 1.0MHz, VR = 4.0V DC Reverse Current (Note 1) Total Capacitance Notes: IRM CT 1. Short duration test pulse used to minimize self-heating effect. DS30355 Rev. 2 - 2 1 of 3 MBRM360 IF, INSTANTANEOUS FORWARD CURRENT (A) IR, INSTANTANEOUS REVERSE CURRENT (mA) 10 10,000 Tj = +125C NEW PRODUCT 1000 Tj = +100C 1.0 Tj = +125C 100 Tj = +75C Tj = +25C Tj = +100C 10 0.1 1 Tj = +25C 0.01 0 0.2 0.4 0.6 0.8 1.0 0.1 0 10 20 30 40 50 60 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 1 Typ. Forward Characteristics VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 2 Typical Reverse Characteristics 100 1000 Single Half-Sine-Wave (JEDEC Method) f = 1MHz IFSM, PEAK FWD SURGE CURRENT (A) 80 60 TC = +25C CT, TOTAL CAPACITANCE (pF) 100 40 TC = +100C 20 0 1 10 100 NUMBER OF CYCLES AT 60 Hz Fig. 3 Max Non-Repetitive Peak Fwd Surge Current 10 0 7.5 15 22.5 30 37.5 45 52.5 60 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Capacitance vs. Reverse Voltage DS30355 Rev. 2 - 2 2 of 3 MBRM360 4 PF(AV), AVERAGE FORWARD POWER DISSIPATION (W) 4 Tj = 125C Note 5 3 NEW PRODUCT IF, DC FORWARD CURRENT (A) 3.5 Note 2 3 2.5 Note 3 2 1.5 1 0.5 0 25 125 75 100 50 TA, AMBIENT TEMPERATURE (C) Fig. 5 DC Forward Current Derating 150 Note 4 2 1 Note 6 0 0 1 2 3 4 5 6 7 IF(AV), AVERAGE FORWARD CURRENT (A) Fig. 6 Forward Power Dissipation Notes: 2. TA = TSOLDERING POINT, RqJS = 3.2C/W, RqSA = 0C/W. 3. Device mounted on GETEK substrate, 2"x2", 2 oz. copper, double-sided, cathode pad dimensions 0.75" x 1.0", anode pad dimensions 0.25" x 1.0". RqJA in range of 20-40C/W. 4. Device mounted on FR-4 substrate, 2"x2", 2 oz. copper, single-sided, pad layout as per Diodes Inc. suggested pad layout document AP02001 which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. RqJA in range of 100-120C/W. 5. Maximum power dissipation when the device is mounted in accordance to the conditions described in Note 3. 6. Maximum power dissipation when the device is mounted in accordance to the conditions described in Note 4. Ordering Information Device MBRM360-13 Notes: (Note 7) Packaging POWERMITEa3 Shipping 5000/Tape & Reel 7. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information MBRM360 YYWW MBRM360 = Product type marking code = Manufacturers' code marking YYWW = Date code marking YY = Last digit of year ex: 2 for 2002 WW = Week code 01 to 52 POWERMITE is a registered trademark of Microsemi Corporation. DS30355 Rev. 2 - 2 3 of 3 MBRM360 |
Price & Availability of MBRM360 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |